Xindian Linear Traverse High precision rolling ring drive GP3-50 type A Wire machine
The use of traverse: spool rod must pass the power, so that the light bar to rotate, then traverse rod back and forth in the light will do parallel movement, so out of line equipment or wire through the dial line cable device at the top of the cylinder (wheel) evenly wound on the take-up spool. Rod requirements: polished rod surface hardness HRC50 DEG C -60 DEG C, straight degree <0.1mm/m, outside diameter tolerance + 0.02mm, the length should be less than 20 times the diameter of the rod diameter - 30 times. Steering rod: according to the collection axis passes to the steering rod is divided into forward and reverse the direction of rotation: dial rod for forward and forward when reversing arm on the touch wheel should be installed in the dial position on this side; such as rotating rod direction reversal, reversal reversing arm the touch wheel should be installed in the chassis behind to change. If the customer does not have special requirements, this product is shipped according to the positive assembly. The speed ratio of the optical rod and the take-up reel: in order to prolong the service life of the rod and the wire rod, it is suggested that the rotating speed of the optical rod and the take-up reel is within the range of 1:1-1:1.5
| Model type | Linear Pitch mm/r | Thrust N | Weight Kg |
| GP3-15 | 11 | 110 | 0.9 |
| GP3-20 | 16 | 160 | 1.6 |
| GP3-22 | 16 | 160 | 2 |
| GP3-25 | 25 | 260 | 3 |
| GP3-30 | 25 | 260 | 2.7 |
| GP3-40 | 32 | 420 | 11.2 |
| GP3-50 | 40 | 700 | 33 |
| GP3-60 | 48 | 1000 | 42 |
For advantages
Stepless Adjustment The take up reel transfers a certan speed to the polishes shaft Without changing the rotating speed of the shaft though move the indicator on the scale dial , adjust the travers drive's speed of reciprocating motion on the shaft , range from 0 to the maximum pitch setting .
Instantaneous Reversal With no need to change the shaft speed of rotation , when the reversal trigger roller contacts the end stop , the travel direction of the travers drive will be pivoted to its mirror diresction with reversal time of not more than i second .
Hight Traverse Speed The traverse drive speed of linear motion on the shaft can be up to 0.4m/sec. max., and the applicable speed is Usually 0.3m/sec. So it can meet the requirement of some situations for high traverse speed and very frequent reversal.
Release Assembly The traverse drive features the release system. It allows the rolling rings to disengage from the shaft
without the shutdown and so can be manually moved at any position on the shaft. It can traverse from the end part.
Product display
Product Tags:
|
|
Auto Rollring Traverse Unit High Traverse Speed Linear Drive System Images
|
